Mass Hoisting License Renewal

Dangers to Avoid as an Equipment Engineer in Massachusetts

Imagine your self just moving to the state of Massachusetts. You have a 30-year mortgage, a wife, and two kids that all need to be taken care of. Your first thought is, how am I going to support my family and put food on our table and a roof over our head. So you grab a magazine and look for the most paying job you can find. There are many dangerous jobs in Massachusetts. Some of these jobs may include correctional institution managing, Waste management and remediation service working, or even working air transportation.
Yet, no one knows a whole lot about one of the most dangerous jobs in all of Massachusetts which is becoming a hoister. When you glance at your magazine you see that becoming a hoister pays very well and you decide to apply that day. Upon applying you are given a long description of the various dangers to avoid while doing the job of a hoister, to scare all the worried workers away. Yet, you are not afraid of anything at the moment but not being able to pay your mortgage and not being able to feed your kids. The endless dangers are announced as followed.

Always be sure to obtain your Mass Hoisting license renewal to stay as safe as possible.

The first danger to avoid while hoisting is having a chain link break and getting your Mass Hoisting license renewal. Breaking a chain could cause your self to get hurt or someone else to get hurt. To avoid having a chain break you will need to refer to the manufacturers operating manual. This is a vital step because you need to make sure to read all the warning labels carefully. After all, they provide important information about the safe operation of the hoist. Next, when using the hoist that is in service some steps need to be followed for a good safety inspection of the chain. Chain inspection is very important for the safe operation of your hoist. If there are gouges or corrosion on the links of your hoist chain, your chain could break during use and could lead to failure. Following checking your chain for damage, make sure to check the links for wear to the diameter by using calipers to measure the links with the unused part of your chain. Then measure the used part of the chain to make sure there has been no stretching. Last you will need to make sure to properly lubricate the chains to prevent wear and increase the life of your hoist.

The next danger to avoid while hoisting is not to use any other chain other than the one provided by the manufacturer recommended hoist load chain. Any substitution can cause damage to the hoist or damage a worker. Next, always use a hoist with the proper chain length. One important inclusion to remember is that when using an electric chain hoist, make sure to use a chain container and always obtain your Mass Hoisting license renewal.

There is a danger that needs to be addressed when using a double reeved load block on a hoist. When using the block check to make sure it has not capsized or has twisted. A twisted load chain can damage both the hoist and the chain you are using. Next on a hoist that uses wire rope, check for broken or frayed wires by running a rag or a gloved hand along the length of the rope. If the strains are frayed, this could be an indication of side pulling and your rope could slide out of groove making it wrap around itself. This is very dangerous because it will wear the rope rapidly and cause it to possibly snap! Obtaining your Mass Hoisting license renewal helps ensure you follow best practices.

Another danger you need to watch out for is having a drum groove that is worn to a point where it is cutting your rope strands. This means you must replace the wire rope and/or your drum. Periodically, make sure to check the diameter of your wire rope just as you did with your links on your chain. This allows you to check for any stretching of the rope. A stretched wire rope will cause excessive wear on your drum grooves causing them to cut your rope strands. If you want to improve your wire rope life, make sure to use the appropriate wire rope lubricant recommended by the hoist manufacturer.

A very common danger is having an overloaded and/or worn out hook. To prevent this from happening you need to inspect your hook for stretching, breaks, cracks, or missing safety latches before use. If any of these conditions are present, you will need to immediately replace the hook.

When referring to the wiring of three-phase hoists, after connecting the hoist to your power source make sure to check your up and down controls so you don’t create a problem where you can not hoist your intended object back up or back down after travel. You check this by pushing on the up and down controls on the push-button station. If the hoist direction does not match your indicated push-button direction a reverse-phase condition may occur and you will need to fix your wiring immediately.

After listening to this announcer over the phone you quickly have realized that there are lots of dangers and things that can go wrong while hoisting. This is the reason why hoisting jobs in Massachusetts is one of the better-paying jobs in your magazine due to all of the dangers that come with it. Not only have you learned some of the dangers that come along with the job of a hoister during your application call but you have shown the person on the other side of that phone that you are willing to learn how to maneuver safely around all the dangerous tasks that come along with hoisting because you want the job more than everything. This job isn’t easy due to the many overwhelming dangers that come with it but with mastery over time, I believe you can become one of the best hoisters in all of the state of Massachusetts as long as you practice safe hoisting every day you go to work! For your Mass Hoisting license renewal contact us today.